While waiting for the new sides to arrive, I have moved on to the fingerboard and neck. And it turns out that I really need to at least get the binding completed so that I know exactly what the width will be at the fourteenth fret.  This is where the neck joins the guitar.  And with a cutaway body style, […]

Over the weekend I was finalizing the forms for the guitar and was finally able to get a close look at the indian rosewood sides and curly maple binding that I ordered from LMI.  I spent a few extra dollars and had them do the critical bending in their shop.  When you order a kit, you get 40% off shop […]

A GoBar clamping deck is a nifty system for clamping.  By bending fiberglass or wood rods between the upper and lower “decks”, it is easy to put pressure just about anywhere you need it.  In guitar building, this is key for tasks such as clamping the internal bracing in place (more on that in future posts), where it is difficult […]

It is hard to build an acoustic guitar without some way of routing perfect circles for the sound hole and the decorative rosette that surrounds the sound hole.  Unfortunately, unless you are making circles all the time, spending the bucks on a commercial jig is hard to swallow. I already had the Dremel from earlier projects and the Dremel plunge […]

It’s hard for me to build only one of anything.  I learn so much on the first attempt that I want to incorporate on the next.  But how many boats, surfboards, or guitars does one man need?  Bad question.  If there is still room in the house, yard, or shop, then there is room for more.  Of course, this needs […]